Factory Source Gi Sheet For Gate - Cold Rolled Steel Tinplate Sheet – Lishengda
Factory Source Gi Sheet For Gate - Cold Rolled Steel Tinplate Sheet – Lishengda Detail:
PRODUCTS DETAIL
Tinplate, also known as tin-plated iron, is an iron sheet plated with tin on both sides, that is, a cold-rolled low-carbon thin steel plate, which is rust-proof, corrosion-resistant and non-toxic. Mainly used to make metal packaging, including canned food, beverages, chemicals, medicine, hygiene, coatings, paints, sprays, cosmetic bottle caps, etc.
Features advantages:
1. Opaqueness: In addition to causing the deterioration of food, light can also cause changes in proteins and amino acids. And vitamin C is more likely to interact with other food ingredients when exposed to light, resulting in a large loss. According to research and analysis, the loss of vitamin C of milk in transparent glass bottles is 14 times higher than that of milk in dark bottles. Light will also cause oxidative odor in milk, and the cracking of radionuclides and methionine will lead to loss of nutritional value. The opaqueness of the tinplate allows the highest retention rate of vitamin C.
2. Good sealing: The barrier property of the packaging container to air and other volatile gases is very important for the preservation of nutrients and sensory quality. Comparison of various juice packaging containers proves that the oxygen transmission rate of the container directly affects the browning of the juice and the preservation of vitamin C; the preservation of vitamin C in metal cans, glass bottles, and aluminum foil glue layers and cartons with low oxygen transmission rate Better, among them, tin cans are the best.
3. Reduction of tin: The tin on the inner wall of the tinplate will interact with the oxygen remaining in the container during filling, reducing the chance of the food ingredients being oxidized. The reduction effect of tin has a good preservation effect on the flavor and color of light-colored fruits and juices. Therefore, juice cans packed with unpainted iron cans are better than those packed with other packaging materials. The acceptance of the flavor quality is better, and the shelf life is thus extended.
Standard | GB/T 2520-2000, JIS G3303-2002 and DIN EN 10203-1991 |
Raw material | SPCC and MR |
Thickness | 0.12 to 0.50mm |
Width | 260 to 1050mm |
Coil diameter | 300/420/508mm |
Tin coating | 2.8/2.8 ~ 5.6/5.6 g/m2 |
Product introduction
Material Grade |
SPCC, MR |
Temper(BA&CA) |
T1,T2,T3,T4,T5,DR8,DR9 |
Tin Coating |
1.1~11.2g/m2 |
Thickness |
0.15~0.50mm(Tolerance: +/- 0.01 mm) |
Width |
600~1050mm (Tolerance: 0~3mm) |
Coil inside diameter |
420/508mm |
Coil Weight |
1~5 MT |
Surface Finish |
Bright, Stone, Silver, Matte,Mirror ,and Color printing |
Type |
Designation of Tin Coating |
Equal Tin Coating |
1.4/1.42.2/2.22.8/2.85.6/5.68.4/8.411.2/11.2 |
Different Tin Coating |
1.4/2.82.2/2.82.8/5.62.8/8.42.8/11.25.6/8.45.6/11.28.4/11.2 |
MR |
Base steel low in residual elements that has excellent corrosion resistance. It is widely used in general applications. |
L |
Base steel extremely low in residual elements such as Cu, Ni, Co, and Mo that has excellent corrosion resistance to certain types of food products. |
D |
Aluminum-killed base steel used in applications involving deep drawing or other types of severe forming that tend to give rise to Lueder’s lines. |
Product detail pictures:
Related Product Guide:
We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Factory Source Gi Sheet For Gate - Cold Rolled Steel Tinplate Sheet – Lishengda, The product will supply to all over the world, such as: Mauritius, Atlanta, Montreal, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By tobin from Karachi - 2018.06.05 13:10
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Arlene from Canada - 2018.05.15 10:52